Skip to main content

My New 1U HP server


This month I got my new server which I want to setup it as my mail server. It is an HP Proliant DL 140 Generation 2. It is a 1U type server. It fits the rack server nicely. This type of machine (I mean the 1U type) surprised me coz I never setup Linux on this *fancy* machine. I just thought that it should be the same as the normal-looking one ,lol. It is except one thing. It has SATA RAID controller. I haven't start installing an OS on it coz I haven't had a clue on how to setup one without CDROM. What? I hear you say. Yes. It has no CDROM. It only has CDROM bay. Damn!. I never checked the spec carefully. I should have known better.

I went to the supplier this afternoon and ordered a DVD-ROM drive. I learned something from this case. I should have checked the spec carefully. Damn!!.

Comments

Popular posts from this blog

mplayer-gui error : Error in skin config file

After installing mplayer-gui package, I can't start it.

$ gmplayer MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Error in skin config file on line 6: PNG read error in /usr/share/mplayer/skins/default/main Config file processing error with skin 'default'
After googling a bit, I found out that it was due to the png files in dir /usr/share/mplayer/skins/default. This is the default skin directory. To fix this error, I have to install ImageMagick package because I want to use the convert program to convert all of the png files to format png24. Thus, cd /usr/share/mplayer/skins/default; for FILE in *.png ; do sudo convert $FILE -define png:format=png24 $FILE ; done
Rerun gmplayer and all should be fine.
Have fun!
UPDATE (02-10-2017)

It doesn't work on Ubuntu 16.04 (xenial) but there's a workaround here.

You can update your syst…

Moving your mysql database to another hard disk

Recently, my server's only hard disk was almost full. I bought a new hard disk with bigger size and I decided to just add it as a second hard disk. Since I need to move it to the 2nd hard disk, I need to find a proper way to move the db with minimum downtime. So I googled around and found a solution.
First, I needed to format the 2nd hard disk and I chose xfs as the filesystem. I created 2 partitions using Linux's fdisk for this task. First partition is 10 GB and 2nd one is around 900 GB. That's approximately added up to 1 TB. Then I mounted the 2nd partition in current partition eg /media/hd2 as follows:
mount -t xfs /dev/sdb5 /media/hd2
where /dev/sdb5 is the partition and /media/hd2 is the mounting dir.
Stop mysql db before doing anything:
service mysql stop
Afterthat, I copied the entire db to newly mounted hard disk:
cp -rv /var/lib/mysql /media/hd2
It will take a while if you have huge databases.
Then, change the ownership of the dir to user and group of mysql:
chown -R mysql:…

Transparent proxy with squid 2.6

I have upgraded my squid from 2.5 STABLE13 to 2.6 STABLE18. Transparent proxy is setup differently in this version. You need this directives in squid.conf (usually in /etc or /usr/local/etc or /usr/local/squid/etc, check with your distro).

acl our_networks src 192.168.2.0/24 127.0.0.1
http_access allow our_networks
http_port 192.168.2.1:3128 transparent
always_direct allow all

where 192.168.2.1 is your proxy server IP address.


If you have flushed your iptables, create new rule:

iptables -t nat -A PREROUTING -i eth0 -p tcp –dport 80 -j REDIRECT –to-port 3128

where 3128 is the port where squid is running.
References:
http://www.deckle.co.za/squid-users-guide/Transparent_Caching/Proxy